Return to site

Step By Step Guide To Resolve Canon printer error B200 at 8005703215

Canon printer error code b200

Canon Printers are renowned for their simple troubleshooting throughout the world. One of the most common errors found in the Canon Printer Error B200.

To fix this mistake, troubleshooting is quite easy. Since the Canon printers come with either 2 or 4 + cartridges, it is different for both printers to troubleshoot the Error B200.

Troubleshooting 4+ Canon Printer Cartridge

    1. Open your printer's top cover. The cradle of the cartridge is raised automatically. Remove from the cradle all the cartridges.
    2. The next step is to remove the printhead that can be easily done by lifting the lever just next to the cradle of the cartridge. After lifting the lever, simply remove the printhead gently from the printer.
    3. Return the printhead to its position in the printer in the third step and make sure the lever is locked.
    4. Instead reinsert all the cartridges in the printer in their appropriate position and make sure there is no open door. By ensuring door closure, the printer is ready with cartridge and printhead control.
    5. Then unplug your printer cable from the power board physically and leave it unplugged for at least 5 minutes or more. This results in the printer being cooled down and also removing the remaining electrical energy.
    6. The printer is re-plugged.
    7. The final step is to start a process of cleaning or carry out thorough nozzle tests. The Error B200 does not normally occur when the printer has daily printhead access.

    Troubleshooting 2 Cartridge Canon Printers

    1. Switch the printer off. The cradle of the cartridge is actually stuck in the state of Canon printer error code B200. Nonetheless, temporarily removing the printer helps us to rectify the Error B200.
    2. Switch the ON printer.
    3. The Error B200 does not indicate the issue cartridge exactly. You would therefore have a rough idea of what cartridge you last replaced. Remove the cartridge from the slot gently.
    4. The printhead of the printer is the component of the cartridge in a 2-cartridge Canon printer. This printer has a limitation that without replacing the problem cartridge you can't prevent the Error B200. Replace the cartridge with an old working cartridge or replace it with a new cartridge.
    5. Do a thorough check of the nozzle or a cleaning cycle. This is a critical step to determine if the desired cartridge is replaced from the printer after the replacement of the cartridge.
    6. If the issue remains unresolved, replace the other cartridge with a new one or an old working cartridge. As this Canon printer works with 2 cartridges, one of the two cartridges is clearly defective. The problem should be solved by replacing and checking both cartridges one by one.
    All Posts

    Almost done…

    We just sent you an email. Please click the link in the email to confirm your subscription!

    OKSubscriptions powered by Strikingly